Why The straight line-drawing machine easily occur when the broken wire phenomenon?
Nature of the wire drawing machine load is approximately constant torque load, but in the normal starting time of around 1.2 to 1.8 times the need for a high starting torque, if the poor lubrication conditions, the necessary starting torque will be higher. Therefore, in dealing with problems, first check whether the mechanical transmission part of the normal rotation is flexible, in particular, to check the brakes (brake) whether the action, reliable, flexible and breaking, the drive belt is too loose because of variable length arising from skid; second must be Check the actual load exceeded the permissible range of equipment can be by adjusting the raw material into the wire diameter, containing C volume, pass compression ratio, lubrication conditions and the drawing die, so as to reduce the actual load and starting torque
